Data Concentrator Unit Using 3G

Creative Micro Systems is the eminent manufacturer of Data Concentrator Unit Using 3G in Bangalore. Data Concentrator Unit Using 3G is usually installed in a substation. It is an intelligent device with built-in LPR modules to acquire data from Electronic Energy Meters. It has an in-built 2G 3G module that transmits data to the Data Acquisition Server Interfaced with Data Logger PC.

  • Upto a maximum of 5 meters per port in RS-485 mode
  • Ethernet port supports 10/100Mbps speed
  • Triple Isolation for Serial ports
  • Ethernet port supports Auto MDI/MDIX
  • Data acquired every 5 minutes/ 15 minutes
  • Each Serial port supports a maximum of
  • Ethernet port supports 10/100Mbps speed
  • Stores data up to 45 days for 20 meters
  • 5V supply for meter serial port in RS232 mode
  • Two Ethernet ports for local and remote data acquisition
  • Acquires Load survey, Midnight data, Tamper and Events
  • Four Serial ports support both RS232/RS485 Interface
  • Each Serial port supports 1 meter in RS232 mode.
  • 30 minutes / 60 minutes as per meter integration period
  • Serial ports support DLMS/COSEM protocol 15 KV ESD Protection and 2KV surge protection for serial port
  • Power supply - 85V AC to 264VAC /120V DC to 370V DC or 20 to 60 V DC
Data Concentrator Unit Using 3G
Ethernet Port
  • No. of ports : 2
  • Speed : 10Mbps, 100Mbps
  • Connector : 8-pin RJ-45 with Built-in indication
  • Protection : Built-in 2kV isolation
  • Status Indication : Link and Speed
Serial Port
  • No. of Ports : 4
  • Interface : RS232/RS485
  • Connector : 8-pin RJ45
  • Data Rate : 9600 bps to 115kbps
  • Status Indication : Tx and Rx
Power Supply
  • Input : 85 to 264 V AC /120 to 370 V DC or 20 to 60 V DC
  • Connector : Disconnection Terminal Block
  • Power : 125 mA maximum @ 220V DC
  • consumption : 500mA at 24V DC
Environmental
  • Operating Temperature : 0°C to 60°C
  • Storage Temperature : -10°C to 85°C
  • Operating Humidity : 5 - 95% RH Non-Condensing
  • Dimension : 72mm(W) x 151mm(H) x 148mm(D)
Standards and Protection
  • Shock and Vibration : IEC 60068-2-27, 2-6
  • EMI/EMC : EN-61000-4-2, 4-4, 4-5, 4-6, 4-8
    : EN-55022, CISPR 11 RE, CE
  • Evironmental : IEC 60068-2-2, 2-3, 2-14
  • Saftey : EN61010-1 Dielectric and Insulation Resistance Test
Ordering Option
  • CS-MDAS-DCU-PS01 : 20 TO 60 V DC
  • CS-MDAS-DCU-PS02 : 85 TO 264 V AC/120 TO 370 V DC
  • CS-MDAS-DCU-4G-PS01 : 20 TO 60 V DC
  • CS-MDAS-DCU-4G-PS02 : 85 TO 264 V AC/120 TO 370 V DC

We have focused on delivering end to end solutions for automation in the power and utility space. We offer excellence in delivery capability to cover Hardware, Software, Networking, Maintenance and Support for core IT Infrastructure Development. Continuous R & D coupled with indigenous design has enabled us to obtain a national footprint with future-ready interoperable products. We offer real customer value by constantly developing new and innovative products as well as solutions that are technologically upgradable and tropicalized to suit Indian conditions. Our strong commitment to customer support makes it the number one choice as a single point IT service provider. We have experienced as well as dedicated manpower whose domain experience and expertise help produce world-class products for different application areas.