IoT Router
The CS-IoT-RTR is a intelligent router that provides cellular connectivity over public 4G/5G* network to remote devices capable of communicating over LAN. The device is typically used for remote data acquisition / remote device monitoring and control.
It is totally transparent to the protocols used for communication between the end-points and principally functions as a gateway providing TCP/IP connectivity for the end-points. The CS-IoT-RTR is equipped with an inbuilt 4G/5G* modem with fall back to 3G/2G for providing wireless connectivity and Dual SIM for high availability.
The device also has an in-built capability to monitor the cellular network connectivity (4G / 5G*). Any loss in the cellular network connectivity is detected and automatically remedial measures are initiated to reestablish connectivity. A secure Web interface allows users to configure and manage the device locally or remotely.
- Features
- Applications
- Specifications
- Supports two Ethernet ports
- Ethernet port supports 10/100Mbps speed, Auto MDI/MDIX
- Supports 4G/5G* Modem, GNSS and WiFi
- Supports connectivity to multiple devices on LAN side (via NAT)
- Transparent gateway functionality - protocol independent with support for VPN (IPSec).
- Dual SIM for high availability
- Detection of loss in cellular network connectivity and automatic re-connection
- Industrial Grade with wide temperature range
- DIN Rail mountable
- Remote data acquisition
- Logistics
- Industrial IoT applications
- Automation
- Smart City
- Building Automation
- 4G or 5G* Modem
- 2 x Normal SIM card with 3V/1.8V
- SMA connector Antenna
- Standard AT Command - 3GPP TS 27.007 & 27.005
- Data Speed :
- LTE FDD - 150Mbps ↓ / 50Mbps ↑
- LTE TDD - 112Mbps ↓ / 10Mbps ↑
- HSPA/HSPA+ - 21Mbps ↓ / 5.76Mbps ↑
- UMTS - 384Mbps ↓ / 384Mbps ↑
- EDGE - 236.8Mbps ↓ / 236.8Mbps ↑
- GPRS - 85.6Mbps ↓ / 85.6Mbps ↑
Note : This is the peak speed supported by the MODEM. The actual speed depends on the network operator, Signal strength and network congestion.
- 2 x 10/100Mbps ports with Auto-negotiation
- Built-in 2kV isolation
- ±15kV ESD and ±2kV Surge protection
- Individual LED indication for Link and Speed
- 8-pin RJ45 connector
- 1 optically isolated status inputs: 9-24 VDC with 10% overload
- 4-5 mA typical current burden per input indications
- Disconnection type terminal block for input
- Optional 220V AC/220V DC or 9 - 60V DC Supply input
- Power consumption is 100mA @ 24V DC
- CISPR11 - Electromagnetic disturbance
- EN61000-4-2 - ESD Immunity Test
- EN61000-4-3 - Radiated immunity test
- EN61000-4-4 - Electrical fast transient/burst
- EN61000-4-6 - Conducted immunity test
- EN61000-4-8 - Power Frequency Magnetic Field Test
- IEC60068-2-1-Cold Test
- IEC60068-2-2 - Dry Heat Test
- IEC60068-2-3-Damp Heat Test
- IEC60068-2-14 - Change of Temperature
- IEC60068-2-6 - Vibration Test
- IEC60068-2-27 - Shock Test
- Dimension: 50 mm(W) x 140(H) mm x 100(D) mm
- Metal Enclosure
- DIN Rail mounting
- Operating Temperature: 0ºC to 70ºC
- Humidity : 95% non-consensing at 55ºC