Transformer Monitoring Using Gsm

Transformer Monitoring Using Gsm

Transformer- Monitoring-Using- Gsm Creative Micro Systems manufactures Transformer Monitoring Using Gsm in Bangalore. GSM Modem is a special type of Modem which accepts Sim card and works under mobile operator like mobile phone. GSM Modem defines modem which supports one or more of protocol in GSM. To monitor the working of Transformer Monitoring Using Gsm,We developed latest technologies. It receives the signal from wireless device Transreceiver and sends those Signals through GPRS enabled SIM to Central Server. The user can login from User End Application Software from his PC to monitor his remote Systems transformer monitoring.It depends on voltage levels and end users, there are distribution substations which supply electrical power to various loads. Remote monitoring and control make these substations works through wireless communication technologies like GSM, GPRS, Ethernet.

IoT device monitoring in India

Features

  • Measuring & statistical functions
  • Fan & pump control of transformer
  • Remote temperature indications for winding and top oil
  • Recording of accumulated use of life of transformer
  • Direct resistance input for tap charger penmen indicator
  • 12 binary outputs
  • Features
  • Specifications
  • Enhances the life of transformer assets
  • Individual phase transformer loading
  • Temperature monitoring of transformer
  • Reporting of power quality values of the transformer
  • Real-time alarms for power outage, tampering and power quality threshold exceedances
  • Data can be used for carrying out Energy Audit, Load Survey and Fault Analysis
  • Real-time dashboard reporting overall transformer and communication status
  • Reduce cost of scheduled and unscheduled maintenance
  • Enables the utility to carry out better load management as it provides accurate real-time information on transformer loading
  • Can be used to ascertain theft detection and localisation based on behavioural patterns of the transformer
  • Decrease outage duration - detect transformer or outgoing LV feeder outages or problems and send outage events to the central system
  • Comprehensive reporting of monitored parameters in a consolidated manner for analysis. Overcapacity, thresholdcrossing, etc are highlighted in the reports
  • Instantaneous alerts to Operator as well as field personnel describing alert incident e.g. oil level low threshold reached,monitored parameter crossing upper/lower threshold, etc.
Digital Inputs
  • 8 / 16 optically isolated status inputs: 24 VDC or 48VDC with 10% overload
  • LED indications
  • 4-5 mA typical current burden per input indications
  • DIN Rail mounted terminal block for input
Control Outputs
  • 4 / 8 Trip / Close 1 Form B contacts
  • 2 Amp current carrying capability
  • 180 W breaking @ 30 VDC
  • 35 W breaking @ 150 VDC
  • Optional Selet-Before Operate (SBO) functionality
  • DIN Rail mounted terminal block for input
Analog Inputs
  • 4-Channel Analog card
  • 2- RTD Input with Pt100
  • 2- Analog input
Multifunction Meter
  • True RMS measurement
  • Accuracy Class 1.0
  • THD for current and voltage
  • Individual harmonics upto 31st order
  • 4 Line LED display
  • CT Input 1A or 5A
  • Frequency 45 to 65 Hz
Modem - 3G Option
  • Dual band HSPA and dual band GPRS/EDGE
  • Upto 7.2mbps Uplink and 21mbps Downlink speed
Modem - 4G Option
  • LTE-FDD: B1/B3/B5/B8
  • LTE-TDD: B34/B38/B39/B40/B41
Communications
  • Protocols: IEC 60870-5-104/DNP3.0 Slave for SCADA connectivity
  • VPN protocol - IPSec
  • 1 x RS232/RS485 Serial Port with Modbus RTU for multifunction meter connectivity
  • Ethernet port for configuration/local control
  • Built-in 3G/4G Modem for remote connectivity
  • Connectors: RJ45 for Ethernet, RJ45 for Serial port, SMA Connector 3G/4G Antenna
Configuration
  • Web based configuration
Auxiliary Power Supply
  • Input options: 100V to 264V AC
  • Maximum of 25 W power
  • Battery Back up : 2 Hours
Physical
  • Dimension : 380mm x 380mm x 210mm
  • Mounting: Wall mount or Pole mount
  • Terminations: DIN Rail mounted Terminal blocks for Digital input, Control output, Power, SMA
  • Connector for 3G/4G antenna.
  • Cable Glands for wire termination
Environmental
  • Operating Temperature: 0°C to 60°C
  • Humidity : 95% non-consensing
Standards and Protection
  • CISPR11 - Electromagnetic disturbance
  • EN61000-4-2 - ESD Immunity Test
  • EN61000-4-3 - Radiated immunity test
  • EN61000-4-4 - Electrical fast transient/burst test
  • EN61000-4-6 - Conducted immunity test
  • IEC 68-2-1 - Cold test
  • IEC 68-2-1 - Dry Heat test
  • IEC 68-2-6 - Vibration test
  • IEC 68-2-30 - Damp heat, cyclic (12+12 hour cycle)
  • IP65 Rated Panel for indoor or outdoor applications